•
If the exposure counter blinks at "00", the film is not
advancing properly. Open the camera back and reload
the film.
•
If you are using DX-coded film, the camera
automatically sets its film speed. If you are using non-
DX-coded film, the film speed is automatically set to
ISO 100,
•
Take care not to touch or soil the DX contacts.
•
Always load and unload film in subdued light.
•
When loading film for the first time, be sure to remove
the protective sheet in the camera's picture area frame.
78
•
Wenn der Bildzahler bei "00" blinkt, wird der Film nicht
richtig transportiert. Die KamerarOckseite offnen und den
Film erneut einlegen.
•
Wenn Sie DX-codierten Film benutzen, stellt die Kamera
automatisch die Film-empfindlichkeit ein. Wenn Sie nicht
DX-codierten Film benutzen, wird die Film-empfindlichkeit
automatisch auf ISO 100 eingestelit.
•
Darauf achten, die DX-Kontakte nicht zu beruhren
Oder
zu
verschmutzen.
•
Den Film stets bei gedampftem Licht einlegen und
entnehmen.
•
Betm erstmaligen Einlegen eines Films unbedingt das
Schutzpapier in der Filmfuhrung entfernen.