Download Print this page

Vantrue Sonnet 1 PRO User Manual page 27

2 channel voice controlled smart dash cam

Advertisement

Low Framerate mode) will be saved in the normal
video folder. In order to prevent the video in parking
mode from being overwritten in a loop, please check
and save the required files in time to prevent loss.
Collision Detection
When collision detection is enabled, the
displayed on the recording interface, indicating that the
recorder is currently using collision detection mode.
Collision detection sensitivity can be adjusted from 1 to
5 levels. You can adjust according to your habits, as
well as the surroundings of the car.
When the Collision Detection is turned on, and no
movement is detected after 5 minutes of recording
(5-minute entry mechanism for short), then Collision
Detection is activated with the
the screen, and the camera automatically turns off.
When the dash cam is turned off, it will start to record
for 1 minute after being shaken, then turn off the dash
cam again.
Note:
If the dash cam continues to be hit during the collision
detection recording, it will exit the collision detection
1440P +1080P 30FPS
00:00:37
09-01-2023
AM
10:39:07
1440P +1080P 30FPS
00:00:37
09-01-2023
AM
10:39:07
- 24 -
ACC
75
MP/H
HDR
icon in the center of
ACC
75
MP/H
HDR
icon will be

Advertisement

loading

This manual is also suitable for:

S1 pro