Vantrue Sonnet 1 PRO User Manual page 10

3.2.3 Power On Dash Cam, Select the Installation
Position
Before installation, please power on the dash cam and
check whether the shooting angle of the front and rear
lens is appropriate through the recording view.
3.2.4 Installing the Electrostatic Stickers
Thoroughly clean the windshield with water or alcohol,
then wipe it with a dry cloth. Stick the electrostatic
sticker next to the rear-view mirror, which is the
recommended position to prevent blocking your view
while driving.
Electrostatic
sticken
Note: The electrostatic stickers come with two-sided
protective film. Please remove the protective film from
No. 1, paste the electrostatic sticker on the windshield,
and then remove the protective film from No.2.
1
- 7 -
2