Advertisement
4.2.6 Parking Mode
Parking Mode operates as a sentry function under
different situations. You can switch to different parking
monitoring modes according to different parking
situations.
After the parking mode is turned on, there are three
ways to record:
•
You can wait for 5 minutes to start automatically.
long press the button
•
Install the Vantrue ACC hardwire kit and the dash cam
•
will directly enter after the car is stopped the engine
(the ACC hardwire kit needs to buy separately).
Note:
•
To ensure the camera works in park mode, please use
the hardwire kits or other stable and continuous
power supply to power the dash cam.
Please use Vantrue hardwire kit for ACC hardwire,
•
ACC hardwire kit from other brands may not work.
When the temperature in the car is as high as
•
60°C(140°F), it is recommended that you turn off the
camera to avoid the abnormal operation of the
camera caused by the high temperature.
•
Time-lapse video recording and parking mode
(including collision detection, motion detection, low
bitrate recording, and low framerate mode) can only
be enabled one at a time. When one is enabled, the
other will be automatically disabled.
All videos recorded in parking mode (Collision
•
Detection, Motion Detection, Low Bitrate Recording,
Parking Mode
Collision Detection
Motion Detection
Low Bitrate Mode
Low Framerate Mode
OK
- 23 -
to begin manually.
Advertisement
