Advertisement
3.2.5 Installing the Front Camera
Remove the protective film from the mount, then fix
the mount and camera on the electrostatics stickers.
3.2.6 Rear Camera Installation
Please select the installation position on the rear
windshield. Remove the protection film of the sticky
pad and rear camera lens. Fix the rear camera in the
selected position and adjust the angle, then use the
rear camera cable to connect the rear camera to the
main front camera. (The rear camera can rotate 360°,
if the installation is wrong, you can turn on the rotating
display on the recording setup to adjust.)
Note:
•
When installing the rear lens, please avoid the
defogging line on the rear windshield, so as not to
affect the video effect.
•
Please clean the lens with the dust-free cloth provided
by VANTRUE.
3.2.7 Wire Storage
Car Charger Cable: Use the crowbar to stuff the car
charger cable under the rubber seal of the A-pillar and
windshield.
- 8 -
Advertisement
