Page 1
On Dash S2 User Manual Vantrue Touch Screen WiFi Dash Cam 122mmX130mm...
Page 2
Hey, find us here: www.vantrue.net/contact facebook.com/vantrue.live...
Page 3
CONTENTS VERZEICHNIS CONTENU ÍNDICE SPIS TREŚCI 目次 目录 Camera Overview What’s in the box? Was ist in der Box? Kameraübersicht Vue d'ensemble de la caméra Qu'y a-t-il dans la boîte? ¿Qué hay en la caja? Descripción General de la Cámara Co znajdziemy w pudełku? Budowa kamery 梱包内容 各部の名称とはたらき 盒内物品清单...
Page 4
CONTENTS VERZEICHNIS CONTENU ÍNDICE SPIS TREŚCI 目次 目录 Specification Warranty & Support Spezifikation Garantie & Support Spécification Garantie & Support Especificación Garantía y Soporte Dane techniczne Gwarancja & wsparcie 主な仕様 保証とアフターサービス 产品规格参数 售后服务...
Page 5
1. What's in the box? Optional Accessories A. Vantrue S2 B. GPS Adhesive I. RC02 Rear Camera Dash Cam Mount C. Car Charger with D.Type C Data Cable J. Type C Cable for Rear Built-in Type C (3.3ft, for transferring Camera(20ft) Cable(11.5ft) files only) E.
Page 6
2. Camera Overview Name Description Power Button Power ON/OFF; Long press to turn on/off the dash cam; short press during recording to enter event recording mode; short press to capture pictures during event recording. SD Card Slot Position for installing the memory card. Support Micro SD Card up to 512GB in FAT32, Class 10.
Page 7
Record road events behind the car. Rear Camera (Optional) Note: The Vantrue S2 dash cam does not have a "reset" button. If the camera gets stuck or doesn't respond, you can quickly restart the camera by simply unplugging and replugging the power cord.
Page 8
Screen Overview G-Sensor ON G-Sensor OFF GPS Signal Connecting Loop Recording Time GPS Signal Locked Loop Recording OFF Memory card inserted Video Resolution NO Memory card inserted Mic is ON Emergency File Lock Mic is OFF Infrared LED ON Infrared LED Auto Infrared LED OFF Recorded Driving Speed (KMH or MPH)
Page 9
3. Installation 3.1 Installing a Memory Card (Recommend Vantrue U3 high-speed microSD card). Please insert a memory card (memory card capacity: 32GB-512GB, card speed: U3/Class10/A2), because the dashcam has certain requirements on the card speed of the memory card. For reliable operation, we recommend using VANTRUE SD card(sold separately).
Page 10
REMINDER: We recommend formatting the card once a month to ensure the normal use of the dash cam. Do not remove or insert the memory card during recording to avoid losing important videos. Please do not use bad cards or low-speed cards on the dash cam, as it is easy to stop or lose the recording due to the failure of the memory card.
Page 11
Remove the 3M tape and stick the Front Dash cam behind rear view mirror, which is the recommended position to prevent blocking our view while driving, then fix the front camera on the electrostatic sticker. 4. Rear Camera Installation (Optional): Please select the installation position on the rear windshield.
Page 12
5. Connect one end of the car charger to the car cigarette lighter, then connect the other end of to the Type C port on GPS mount of the front camera. 6. After the camera is turned on, you can adjust the lens angle of front, cabin and rear camera -Look at the live view on the LCD screen.
Page 13
Please scan the relevant version QR code below to download the APP and install it. Search for "Vantrue Cam" APP in App Store or Google Play Store to find the App and then download and install it on your phone.
Page 14
Steps 3 WiFi Connection Turn on the WiFi function of the camera, enter the WiFi settings of the mobile phone, and then find the WiFi name such as: S2_VANTRUE_XXXX, and enter the WiFi default password: 12345678 to connect to WiFi. - 10 -...
Page 15
Steps 4 APP Connection After the WiFi connection is successful, click "+" when opening the APP for the first time, add the camera model, and then the APP will automatically connect to the camera and display the current real-time recording situation of the camera.
Page 16
The initial password of this device is only used for initial login. In order to prevent potential security risks, please be sure to change the initial password in time after the initial login to prevent others from logging into your device without authorization or other adverse consequences. If you forget the WiFi password, you can restore the default setting of the device, and the Wi-Fi password of the device will also be restored to the default password(12345678).
Page 17
Steps 6 APP Upgrade Open the "Vantrue Cam" App, connect to the Wi-Fi, and enter "Settings> About> Detect New Version", the App will automatically detect whether the App version is the latest version. If there is a new version of the App, follow the App prompts and upgrade the version.
Page 18
4. Basic Operation 4.1 Menu Settings The Vantrue S2 dash cam has 3 function menus, which are record settings, system settings and file browsing. You can set your dash cam according to your requirements in this function setting. After powering ON the camera, click the icon to enter the setup process.
Page 19
-Number Plate: After setting, your license plate number can be displayed in the recorded video. -Stamp: Enable or disable the watermark stamp of the video and photos. The watermark stamp includes date and time label, VANTRUE label, license plate number, GPS location information, speed label. All enabled by default.
Page 20
off, speed unit Settings, GPS information. B. System Setup -Language: Available languages are Engish/ Français/ Español/ Deutsch/ Italiano/简体中文/русский/ 日本語/ Polski. -WiFi: The default setting is Off. After WiFi is enabled, mobile phones can connect to WiFi and operate the dash cam through mobile phones. -Format memory Card: Format all data on the memory card -Format Reminder Setup: Select the reminder options: 15 Days, 1 Month, and Off.
Page 21
-Frequency: Different countries have different frequency, in order to avoid affecting the video, you can choose 50Hz or 60Hz frequency according to different regions. -System Info: Check the current model, firmware version and Vantrue official website. -Default Setting: Reset the device back to factory settings.
Page 22
Single Rear Recording Display 4.2.2 Loop Recording After inserting the memory card and connecting the power, the S2 dash cam will auto turn on and enter loop recording. The duration of each recorded video will be saved based on the loop recording time you set, saved in the normal video folder.
Page 23
capacity, the new loop recording file will automatically overwrite the original loop recording file. After this function is enabled, the video file will automatically overwrite the loop, so as not to stop recording in the driving process. Note: The normal operation of the loop recording function is very dependent on the speed of the memory card, so please format the memory card regularly to avoid problems such as excessive memory card files and card aging that affect the normal loop recording.
Page 24
Note: The sensitivity of the automatic locking video trigger is determined by the sensitivity of the collision. The higher the sensitivity setting, the greater the probability of being triggered. The total capacity of the event video file accounts for 20% of the total capacity of the current memory card.
Page 25
Collision Detection mode is recommended for high temperature in summer. When the temperature inside the car is as high as 60°C(140°F), it is recommended that you turn off the camera to avoid abnormal operation of the camera caused by the high temperature. Parking mode (including collision detection, motion detection, low bit rate recording, and low frame rate mode) and Time-lapse recording can only be enabled for one of them.
Page 26
the screen, and the camera automatically turn off. When the dash cam is turned off, it will start to record for 1 minute after being shaken, and then turn off the dash cam again. Note: If the dash cam continues to be hit during the collision detection recording, it will exit the collision detection mode and enter the normal recording, restarting the 5-minute entry mechanism.
Page 27
When the motion Detection was turned on, and no movement is detected after 5 minutes of recording, then an orange icon will appear in the center of the screen. The dashcam enters the standby mode, and the screen turns off after 30 seconds. When the dash cam (any camera in front / inside/rear of the car) detects the movement of the object, it will auto start recording for 30 seconds and save the recording in the Normal folder.
Page 28
C.Low Bitrate Recording When Low Bitrate recording is enabled, the icon will be displayed on the screen, depending on whether you choose 1080P 15FPS or 720P 15FPS. After parking, if no movement is detected after 5 minutes of recording, there will be an orange icon that appears in the center of the screen which means Low Bitrates recording is activated.
Page 29
D.Low Frame Rate mode If Low Frame Rate mode is selected, the 5-minute entry mechanism will be enabled on the dash cam after the car is stopped, and the low frame rate mode will enter automatically. For example, if you select 1FPS and the current video resolution frame rate is 30FPS, the recorder will generate a 30FPS video per second.
Page 30
4.2.5 GPS Function The GPS function is also one of the important functions of the dash cam. GPS is enabled by default, and the camera receives GPS signals through the GPS mount. It can automatically correct the time and date in your area, recording the location where the video was recorded and the speed of the car at the time.
Page 31
GPS information is recorded in the video you recorded. To view it, please download and install VANTRUE Cam APP and VANTRUE GPS Player (available for download on www.vantrue.net). 4.2.6 Viewing Video/Photos a.Viewing files on the Camera After clicking to enter the file, enter any folder, and after opening the video file, you can choose to play at double speed and delete the file.
Page 32
Note: Standard camera settings and operations will be disabled when the camera is connected to your computer in the "USB Connecting" state. c.View on “Vantrue Cam” APP After the camera is successfully connected to the mobile phone through WiFi, it can play back, download and delete files in the mobile APP. To play back files in the APP, you can choose to playback the files in the SD card, or download the files to the local and play them back.
Page 33
The system will automatically update if the micro SD card contains the firmware upgrade file. The camera will restart once the upgrade has been completed. The latest firmware version is always available at the official VANTRUE website (www.vantrue.net). We strongly recommend registering your product (www.vantrue.net/register) to receive a notification email when a new firmware update is available.
Page 35
Type C 6. Warranty & Support Warranty The VANTRUE S2 Dash Cam comes with a full 12 months warranty. If you ® register your product on our official site (www.vantrue.net/register), you can extend the warranty to 18 months. Support new If you have any questions regarding your product, please do not hesitate to contact us at support@vantrue.net, or drop us a message through the...
Need help?
Do you have a question about the S2 and is the answer not in the manual?
Questions and answers