Advertisement
Record Setup
Time Lapse
Parking Mode
Low Light Night Vision ...
Collision Detection in P...
OK
Note:
•
The power-saving mode/quick start mode will only
take effect after the collision detection is turned on. If
the collision detection is turned off or other parking
monitoring modes are selected, this function will not
take effect.
Enable power saving mode by default.
•
4.2.5 Motion Detection Area
The motion detection range of the front and rear areas
can be adjusted respectively, and the set range can be
adjusted up and down, left and right.
Front Area Detection
OK
Note：
•
This feature only works in motion detection parking
mode.
You can select 1X, 2X, 3X, 4X, or 5X range. The 5X
•
range is the global detection mode.
16/20
Collision Detection in Parking Mode
OK
2X
OK
- 22 -
Power Saving Mode
Quick Start Mode
Rear Area Detection
2X
Advertisement
