2.5 Integration via KNX bus
Synco 700
A6V11545892_en--_e
The RDG2..KN room thermostats can be integrated as follows:
●
Integration into Synco 700 system via LTE-Mode (easy engineering)
●
Integration into Desigo via group addressing (ETS) or individual addressing
–
Max. 60 RDG2..KN per line and do not mix RDG2..KN with other KNX
products on the same line
●
Integration into Desigo CC via IP router
●
Integration into third-party systems via group addressing (ETS)
The following KNX functions are available:
●
Central time program and setpoints, e.g., when using the RMB795B central
control unit
●
Outside temperature or time of day via bus displayed on thermostat
●
Remote operation and monitoring with web browser using the OZW772 web
server
●
Maximum energy efficiency due to exchange of relevant energy information,
e.g., with Synco 700 controllers (e.g., heating demand, cooling demand)
●
Alarming, e.g., external fault contact, condensation, clean filter, and so on
●
Monitoring input for temperature sensor or switch
Engineering and commissioning can be done by using:
●
Local DIP switches and HMI
●
Synco ACS
●
ETS5 or higher versions
●
Siemens smartphone application PCT Go
The RDG2..KN room thermostats are especially tailored for integration into the
Synco 700 system and operate together in LTE-Mode. This extends the field of use
of Synco for individual room control in conjunction with fan coil units, chilled
ceilings and radiators.
Overview
Integration via KNX bus
19 | 186
2