5
Supported tools
ETS
Notes
Humidity parameters
150 | 186
3 Plant type (application), Control Sequence and other control parameters ([Pxx]
description) can be downloaded.
For more details on control parameters, see Control parameters [➙ 138].
●
ETS version 4 or higher is used to assign communication objects to group
addresses (S-Mode)
●
ETS version 4 or higher is used to download the application and parameters
1 Select Room relative humidity in the left pane to display humidity parameters.
2 Adjust the parameters as needed. See Control parameters [➙ 138] for more
details on control parameters.
3 Select as group object in checkbox Humidity setpoints, to display the S-Mode
humidity setpoint in the Group Objects tab as follows:
A6V11545892_en--_e