Integration With Knx Bus - Siemens RDF800KN Series Manual

Synco 700
10 / 94
Siemens
Smart Infrastructure
2.5

Integration with KNX bus

The touchscreen room thermostats can be integrated as follows:
· Into Synco living using group addressing (ETS)
· Into Desigo using group addressing (ETS) or individual addressing
· Into third-party systems using group addressing (ETS)
· With Synco 700 system using LTE mode (easy engineering)
The following KNX functions are available:
· Central time program and setpoints. For example, when using the RMB795B
central control unit.
· Outdoor temperature or time of day displayed on thermostat using the bus
· Remote operation and monitoring. For example, using the RMZ792-B bus
operator unit.
· Remote operation and monitoring with web browser using the OZW772 web
server.
· Maximum energy efficiency due to exchange of relevant energy information. For
example, with Synco 700 controllers, heating demand, cooling demand.
· Alarming (such as, external fault contact, condensation, or clean filter).
· Monitoring input for temperature sensor or switch.
Engineering and commissioning can be done using...
· local DIP switches/HMI
· Synco ACS service tool
· ETS
The touchscreen room thermostats are tailored for interoperation with the Synco
700 system and operate together in LTE mode. This extends the field of use of
Synco for individual room control in conjunction with fan coil units, heating units,
chilled ceilings and radiators.
RDF800KN.., RDF800KN/VB, RDD810KN/NF Basic documentation CE1P3174en
2020-02-21