Anest Iwata WIDER4L Series Instruction Manual page 12

Residual risk
List of residual risks requiring protection measures by machine users
(Abbreviated Name: List of Residual Risks)
Product model: " Spray gun : WIDER4 / WIDER4L "
※ Be sure to read and understand the instruction manual before using the product. This document is a reference material in the instruction manual and must
not be used with only an understanding of the contents of this document.
※ 1 "degree of hazard" is classified and described according to the following definitions
DANGER Contents that are likely to cause death or serious injury if protection measures are not implemented.
WARNING Contents that may cause death or serious injury if protection measures are not implemented.
CAUTION Contents that may cause minor injury if protection measures are not implemented
※ 2 The symbol shown as "Location on machinery" is the number of the machine section on the Residual Risk Map of the Product. See Residual Risk Map
for specific points on the machinery.
Operatio
No. nal Works
Phase
Preparation
1
Use work
During work
2
Use All
Use and During work,
3
mainten decompositi
ance on and rinse
4
Use During work
5
Use All
Preparation
6
Use work
During work
Use and Preparation
7
mainten work
ance During work
Preparation
8
Use work
During work
Use and During work,
9
mainten decompositi
ance on and rinse
Use and Preparation
10
mainten work
ance During work
Mainten Preparation
11
ance work
Qualifications Location on
and Training the
Degree
required for machinery
the work *2
A
B
Default
C
Default
Default
Default
Default
Default
A
D
Harm
Type of Harm
*1
A wrong connection between the air joint
and the paint joint may cause paint to
Warning
spout from an unexpected place and hit
the operator.
Ignition and fire caused by static electricity
Warning
Organic solvents, etc., may come into
contact with the eyes and skin, causing
Warning
irritation.
Tenosynovitis due to repeated pulling of
Warning
the trigger
Fire, electrical appliances, etc. ignite, and
Warning
fire generatings.
Supply at specified pressure or higher,
paint spouts from unexpected places,
Warning
hitting human body or eyes, blindness
The product is modified, parts other than
genuine parts are used, and an
Warning
unexpected failure
generatings.
The patient stayed in a location where
noise such as blowing air was generated
Warning
for a long time, resulting in hearing loss.
Organic solvent poisoning Due to inhale
Warning
of solvent and paint mist
If the hoses are triad to be disconnected
under pressurized condition, paint,
Warning
cleaning liquid, air, etc. are spouted out
and injured.
Needle valve piercing with sharp corners
Caution
２
ANEST IWATA Corporation
Protective measure protective
measure performed by the
machinery user
To provide personal protective
equipment
Use of a hose with a ground and
confirmation of ground
To provide personal protective
equipment
Moderate rest
Strict ban on the use of fire
To provide personal protective
equipment
No modification
or accident Use of genuine parts
Use of earplugs is recommended.
To provide personal protective
equipment
Work in painting booths, etc.
To provide personal protective
equipment
Remove residual pressure
To provide personal protective
equipment
2020/7/22 Create
Instruction
Manual
Referenced
page
P2
P2
P2
P2
P2
P2
P2
P2
P2
P2
P2
No.R022-00
Code No.03017660