Table of Contents
Advertisement
Note: After the desired color theme is selected, the application must reboot for the changes to be
applied.
6.5.6 MD Printer Connection
This option is used to establish a wireless connection between the tablet and the printer (sold separately)
while performing printing operations.
The App is compatible with the "Matco Tools Wi-Fi Printer" (sold separately) and "System" (external
printer).
1. For Matco Tools Wi-Fi printer, follow the instructions described in the User Manual included with the
printer to configure it.
2. For other Wi-Fi printers,
Before printing, make sure the following conditions are met:
• The Wi-Fi printer is powered on and working normally.
• The print service plug-in associated with the printer is already installed on the tablet (Go to Google Play
or use the Browser to download and install it).
Follow the steps below to proceed:
1. Set the default printer as System.
2. Go to "Settings" -> "Network & Internet" -> "WLAN", set the WLAN switch to Off.
3. On the report details page, tap
4. Touch
next to Select a printer on the upper left corner of the screen.
5. Select "All Printers" -> "Add printer" and enable the installed printer service, the system starts searching
for all available Wi-Fi printers of the brand.
6. Select the desired Wi-Fi printer from the list. If the chosen Wi-Fi printer hotspot is open, the tablet can
connect it directly. If it is encrypted, a password may be required. Refer to the Wi-Fi printer user manual
to get the default password.
7 . Now the printer is ready for printing.
8. Alternatively, you can also choose Save as PDF to save the current diagnostic report as a PDF file for
later printing.
6.5.7 Shop Information
This option lets you define the detailed information of your workshop. It mainly includes Workshop,
Address, Zip Code, Telephone, Email etc.
After inputting, tap "Save" .
Once you saved the shop information, it will be loaded automatically in the "More Information" box every
time you save the diagnostic report.
6.5.8 Shop Management
This option allows you to synchronize the diagnostic reports generated by your MDMAXPROHD to your
MATCO Shop Management System (powered by SHOPBOSS) Shop ID for easier management.
6.5.9 Favorites
This feature provides you quick accesses to some renowned and popular repair and maintenance website
links. These may include general information about a component or system, diagnostic and troubleshooting
procedures and/or repair instructions. Moreover you can also add more repair websites into Favorites so
that you can quickly open them in future.
6.5.10 Hide or Remove Software
This item allows you to hide/clear the diagnostic software that is not frequently used.
2311226-16
32
User Manual
.
MDMAXPROHD
www.matcotools.com
877-853-3738
Advertisement
Table of Contents
