Initial Use; Charging The Tablet; Power On/Off; Locator & Navigation Buttons - Matco Tools MAXIMUS PRO HD User Manual

Hide thumbs Also See for MAXIMUS PRO HD:
Table of Contents

Advertisement

3 Initial Use

3.1 Charging the Tablet

Warning:
• Only use the included power adapter to recharge the tablet. Use of any other adapter will damage the
tool. We assume no responsibility for damage or loss resulting from using other similar adapters other
than the specified one.
• Always charge on a non-flammable surface in a well-ventilated area.
To check the battery power level, press and hold the Power button about 3 seconds to turn on the tablet.
Power level is indicated as a percentage in the upper right corner of the screen. If the power level drops
below 10% while the tablet is on, a Connect Charger notification will appear on the screen.
1. Connect one end of the power adapter to Type C
charging port of the tablet, and the other end to the
AC outlet.
2. The charging LED illuminates solid red and the
charging symbol

3.2 Power ON/OFF

Note: If it is the first time you use the tablet or the tablet keeps idle for a long time, it could fail to be
turned on. It results from low battery. In this case, please recharge it for a while and try to turn it on.
1. Press and hold the POWER button for about 3 sec-
onds to turn on the tablet. The system starts initial-
izing and then enters the Home screen.
3.3 Locator & Navigation Buttons
On-screen keys and status bar are as follows:
1
Tap
2
Tap
Tap
3
application, tap it. To remove an application, swipe it upwards.
4
Tap
Tap
5
Screenshots folder.
6
2311226-16
8
will appear on the screen.
1
2
to return to previous screen or exit the application.
to navigate to the Android System's home screen.
to display a list of applications that are currently running or recently used. To open an
to display all in-app tasks that are currently running.
to capture the current screen and all captured screenshots are stored in the
: Shows whether the VCI device is properly connected or not.
User Manual
3. Once it illuminates solid green, it indicates that
the battery is fully charged and the charging
complete symbol
bol. Disconnect the power adapter from the AC
outlet.
2. To turn the tablet off, press and hold the
POWER button until an option menu appears.
Tap Power Off.
4
5
3
www.matcotools.com
MDMAXPROHD
replaces the charging sym-
6
877-853-3738

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdmaxprohd

Table of Contents