Table of Contents
Advertisement
On-screen Buttons:
Customer Signature: Tap to create customer signature.
Print: Tap to print the report out via the external printer.
Share: Tap to share the report with others.
By default, the workshop information is blank. You can configure and revise it from the "Shop Information"
in "Toolbox" -> "Settings" .
Once you configured the information, it will be automatically generated every time the diagnostic report
is saved. All vehicle and workshop information will be appended as a tag on the diagnostic report, which
allows you to easily retrieve the desired report while performing "Filter" function of Diagnostic Report.
B. Clear Fault Code
After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can use
this function to erase the codes from the vehicle. Before performing this function, please be sure the
vehicle's ignition key is in the ON position with the engine off.
Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper repairs to correct the
problem that caused the code(s) to be set are not made, the code(s) will appear again and the check engine
light will illuminate as soon as the problem that cause the DTC to set manifests itself.
On the diagnostic function selection screen, tap "Clear Fault Code" , a confirmation dialog box pops up on
the screen. Tap "Yes" and the system will automatically delete the currently existing trouble code.
Warning: After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve
codes again. If there are still some trouble codes in the system, please troubleshoot the code using a
factory diagnosis guide, then clear the code and recheck.
C. Read Data Stream
This option lets you view and capture (record) real-time Live Data. This data including current operating
status for parameters and/or sensor information can provide insight on overall vehicle performance. It can
also be used to guide vehicle repair.
Danger: If you must drive the vehicle in order to perform a troubleshooting procedure, ALWAYS have
a second person help you. Trying to drive and operate the diagnostic tool at the same time is dangerous,
and could cause a serious traffic accident.
On the diagnostic function selection screen, tap "Read Data Stream" , the system will display data stream
items.
www.matcotools.com
877-853-3738
User Manual
MDMAXPROHD
2311226-16
19
Advertisement
Table of Contents
