Table of Contents
Advertisement
3.4 Wi-Fi Setup
MDMAXPROHD has built-in Wi-Fi that can be used to get online. Once you're online, you can register your
tool, update diagnostic software & APK, browse the Internet, get apps and send email on your network.
Note: Once WLAN is set as ON, the tablet will consume more power. While it keeps unused, please
set it off to save power. While WLAN is not in use, please turn it off to conserve battery power.
Connect to a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
2. Slide the Wi-Fi switch to ON, the tablet starts search-
ing for available wireless LANs.
Disconnect from a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
3.5 Adjust Brightness
Note: Reducing the brightness of the screen is helpful to conserve the battery power.
1. On the home screen, tap Settings -> Display ->
Brightness level.
3.6 Change System Language
The tool supports multiple system languages. To change the language of the tool, please do the following:
1. On the home screen, tap Settings -> System -> Lan-
guage & input -> Languages.
2. Tap Add a language, and then choose the desired
language from the list.
3.7 Set Standby Time
If no activities are made within the defined standby period, the screen will be locked automatically and the
system enters sleep mode to save power.
1. On the home screen, tap Settings -> Display -> Ad-
vanced -> Screen timeout.
www.matcotools.com
877-853-3738
User Manual
3. Select the desired WLAN network from the
list. If the chosen network is open, you can
connect directly. A password may be required
for secured networks.
2. Tap the network with a Connected status, then
tap Forget.
2. Drag the slider to adjust it.
3. Tap and hold the desired language and drag it
to the top of the screen and then release it, the
system will change into the target language.
2. Choose the desired sleep time.
MDMAXPROHD
2311226-16
9
Advertisement
Table of Contents
