Table of Contents
Advertisement
2.2 VCI Device
The MAXSYNC VCI dongle works as a heavy duty / medium duty / light duty vehicle communication
interface device, which is used to connect to the vehicle's DLC (Data Link Connector) port via the diagnostic
cable to read the test data and then send it to the tablet.
No.
1
DB-15 Diagnostic Connector -- To connect the diagnostic cable.
2
Touch Screen
DC-IN Port
*Warning: The VCI dongle obtains power through the vehicle's DLC (Data Link Connector) via
the diagnostic cable. Do NOT connect the DC-IN port to an external DC power supply if the VCI
dongle can be powered up normally.
3
If the pin of the DLC is damaged or the DLC has insufficient power, connect the DC-IN port to
an external DC power supply.
No responsibility can be assumed for any damage or loss caused as a result of not strictly
following the above method.
4
Data I/O Port -- To connect it to the tablet to perform diagnosis via the data cable.
5
LAN/WAN Port -- Reserved for other purposes.
2311226-16
6
User Manual
Name & Descriptions
www.matcotools.com
MDMAXPROHD
877-853-3738
Advertisement
Table of Contents
