Table of Contents
Advertisement
• Min/Max: Tap "Min/Max" to define the maximum/minimum value. Once the value goes beyond the
specified value, the system will alarm.
• Customize: If desired, you can customize to show only those PIDs you are interested in viewing. Tap
"Customize" to add/change other data stream items.
Note: The real time (Live Data) vehicle operating information (values/status) that the on-board
computer supplies to the tool for each sensor, actuator, switch, etc. is called Parameter Identification
Data (IPD).
Compare Sample: Tap it to select the sample file, the values you customized and saved in process of DS
sampling will be imported into the "Standard Range"column for your comparison.
Note: Before executing this function, you have to sample the values of data stream items and save it
as an sample data stream file.
Save Sample: This item enables you to customize the standard range of live data stream items and save
it as DS sample file. Each time you run the data stream items, you can call out the corresponding sample
data to overwrite the current standard range.
Tap it to start recording the sample data (*Only data stream items with units will be recorded). Once
recording is complete, tap
Tap the Min./Max. value to change it. After modifying all desired items, tap "Save" to save it as an sample
DS file. All DS files are stored under the "Data Samples" file of "Saved Reports" in "Toolbox" .
Graph: Tap it to view the waveform.
• Combine: This option is mostly used in graph merge status for data comparison.
• Value: Tap to display the parameters in texts.
• Customize: This option allows you to select only the PIDs that you wish to display. Tap it, a pull-
down list of the data stream items appears on the screen. Select (Up to 8 data stream items can
be selected)/deselect the desired items and then screen will display/remove the corresponding
waveforms immediately.
Report: To save the current data as a diagnostic report. All diagnostic reports can be accessed from "Toolbox"
www.matcotools.com
to stop it and navigate to the data revision screen.
877-853-3738
User Manual
MDMAXPROHD
2311226-16
21
Advertisement
Table of Contents
