Driver's Door Switches - BYD SEAL 2023 Owner's Manual

Driver's Door Switches

Power Window Switches
When the ignition switch is on OK, all
●
the window switches can lift up and
down the window. After the vehicle is
powered OFF, no power windows can
be regulated.
Driver side windows control switch
There are two gears of window control,
like the figure ① and ②.
Manual operation
Press the window regulator switch to
●
① mode position and keep it (for
vehicles without anti-pinch function,
directly press and hold the window
regulator switch) to lower the window;
releasing the switch can immediately
stop the window lowering; pull up
the window regulator switch to ①
mode position and keep it (for vehicles
without anti-pinch function, directly
pull up and hold the window regulator
switch) to raise the window; releasing
the switch can immediately stop the
window raising.
Auto lifting
Press the window regulator switch to
●
② mode position and release it to
automatically lower the window; pull
up the window switch to ② mode
position and release it to automatically
raise the window.
Anti-pinch
If someone or an object is caught
●
by the window when it is rolling up,
the window stops and rolls down
automatically.
REMINDER
Do not intentionally activate the
●
anti-pinch function by jamming
any part of your body into the
window.
The anti-pinch function may not
●
work if an object is jammed into
the window when it is almost
completely closed.
Windows with anti-pinch function
●
can control opening or closing
the window* by intelligent voice
assist.
Automatic window rolling-up and anti-
pinch failure
If the window working indicator
●
flashes, it indicates that the automatic
window closing and anti-pinch
functions fail. In this case, follow
the steps given below to restore the
functions:
Pull up and hold the manual closing
●
gear of the regulator switch to
allow the window to lift to the top
position and keep the window stall
at the top position for 400 ms,
until the switch indicator changes
03
71