Energy Regeneration Settings - BYD SEAL 2023 Owner's Manual

Dynamic mode: displays the estimated
●
driving range based on the available
battery power and current average
energy consumption.
The set driving range display mode is
●
memorized by the system. When the
vehicle is powered off and then on,
the display mode set last time will be
maintained.
REMINDER
Driving Range Display Mode
●
Settings:
The driving range that is
●
displayed after a full charge may
vary, depending on calculations
of the energy consumed the last
time the vehicle is used.
The displayed driving range is
●
adjusted based on whether the
A/C is on, selection of driving
mode, and the driver's driving
habits, so that this range can
be closer to the estimated
remaining range under current
use.
Energy Regeneration
Settings
Energy regeneration: In this process,
the motor will generate reverse torque
when the vehicle is decelerating, and the
generated energy will be recovered and
reused to improve the energy utilisation
rate of the vehicle.
Brakes regeneration:
●
When the vehicle is running in D
●
position, if you completely release
the accelerator pedal and depress
the brake pedal, and the vehicle is
in a stable state, priority is given
to responding to motor regeneration
for deceleration during braking
92
and deceleration. When the motor
capacity is insufficient, the hydraulic
brake will actively intervene to
maintain the deceleration demand
of the vehicle, and the generated
energy will be recovered to improve
the vehicle economy.
Sliding recycling:
●
When the vehicle is running in
●
D position, if you release the
accelerator pedal below a certain
depth, the motor will output reverse
torque to decelerate the vehicle,
and the generated energy will be
recovered to improve the vehicle
economy.
During the driving, energy is recovered
●
through regenerative brakes when
the vehicle decelerates. For higher
efficiency, do not accelerate or
decelerate the vehicle unnecessarily.
The energy feedback intensity can
●
be set with the energy feedback
mode button or on the infotainment
touchscreen.
Standard: When the accelerator
●
pedal is released, the motor
controller recovers energy in the
standard level, and the vehicle
deceleration is in the standard level.
High: When the accelerator pedal
●
is released, the motor controller
recovers more energy, and the
vehicle deceleration is high.
The corresponding settings can
●
be made on the infotainment
touchscreen →
Energy Manager → Energy feedback
intensity.
You can select the regeneration
●
intensity based on the deceleration
sense when releasing the accelerator
pedal. Different deceleration senses
deliver different driving experiences.
→ New Energy →