BYD SEAL 2023 Owner's Manual page 131

Hide thumbs Also See for SEAL 2023:
Table of Contents

Advertisement

Targets that may not be responded
include, but are not limited to:
Pedestrians and animals.
The environment contains
electromagnetic interference or
other influences.
Vibration or collision influence on
sensor calibration of BSD's rear corner
mmWave radars can degrade system
performance. If this is detected,
contact a BYD authorised dealer or
service provider.
WARNING
Blind spot assist serves as a driver
assistance function only, so the
driver must be fully responsible
for driving safety.
Influence of weather, road
conditions, and other factors may
cause blind spot assist to fail.
Use blind spot assist based on
your needs, traffic, and road
conditions.
Head-up Display (HUD)*
Head-up Display (HUD): The head-up
display (HUD) function projects important
information, including vehicle speed,
navigation, speed limit, ACC, lane
departure, and BSD into the driver's
field of view on the front windscreen. It
improves driving safety by preventing the
driver from frequently changing the focus
of their eyes.
How to Use
To enable or disable HUD, go to
infotainment touchscreen →
Vehicle Settings.
By factory default, HUD is on and the
image is displayed. When it is disabled,
no HUD image is displayed. The system
130
defaults to the previous settings when
the vehicle restarts.
Height adjusting: adjust the height of
HUD virtual image in between -10 and
10. A total of 21 values are available,
and the default value is 0.
Brightness adjusting: adjust the
brightness of HUD virtual image in
between 1 and 11. A total of 11 values
are available, and the default value is
6.
Whirling adjusting: adjust the angle of
HUD virtual image. A total of 11 values
are available, and the default value is
0°.
Mode setting: Used to select "Classic"
(default setting) or "Snow" mode
according to the environment of the
vehicle.
Settings optional for display: Safe
driving assistance can be selected and
is enabled by default.
Do not put articles on the head-up
display.
Wipe the dust on the dust-proof
board with soft cotton cloth or
paper towel.
No water or other liquid is allowed
to flow into the opening of the
head-up display.
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents