BYD SEAL 2023 Owner's Manual page 56

REMINDER
When the entyre vehicle is
●
powered off, the boot can be
unlocked from inside the vehicle.
Setting boot opening height*
Open the boot manually or
●
automatically to the desired position,
keep it at this position, and then
press and hold the interior boot button
for over three seconds. The speaker
sounds for one second, indicating that
the opening height is successfully set
to the current position.
Set the boot opening height by going
●
to infotainment touchscreen →
Vehicle Settings → Window and Lock.
Anti-pinch
If the lid receives a hindering force while
it is closing, it will automatically switch
to the opposite direction. If it receives a
hindering force while it is opening, it will
halt.
When the boot fails to act
automatically
Manually and completely close the boot
for recovery.
When reconnecting the low-voltage
battery
Manually close the boot to ensure the
power boot lid functions normally.
WARNING
In order to prevent serious
●
injury, make sure to observe the
following precautions:
Never try to deliberately activate
●
the anti-pinch function.
Make sure to alert people nearby
●
of the lid motion.
Make sure hands and fingers are
●
clear from the lid area when it is
closing.
Make sure the surrounding area
●
is safe when opening or closing
the boot.
Make sure the boot is properly
●
closed when the vehicle is in
motion.
Make sure to remove any ice
●
or snow from the area before
opening the boot. otherwise the
lid may close again.
Do not manually interfere in lid
●
motion when it is opening or
closing.
→
Be mindful of windy conditions
●
when opening or closing the
boot.
The anti-pinch function may fail
●
to work if an object is caught
right before the boot is fully
closed.
The lid may start closing
●
before fully opening. Opening
or closing the boot on slopes
is more difficult than on level
ground. Be mindful of the
possibility of the lid to move
on its own in such conditions.
Before loading or unloading the
boot, make sure the lid is fully
open and secure.
03
55