Table of Contents
Advertisement
Anti-theft Alarm
System
Anti-theft Alarm System
When armed, the system sounds an alarm
and triggers turn signal flash when any
door is opened.
Arming the system
1. Switch the ignition off.
2. All occupants get off the vehicle.
3. Lock all doors. This makes the
anti-theft indicator steady on. The
anti-theft alarm system will arm
automatically after 10 seconds, and
the anti-theft indicator will then begin
to flash.
4. You can leave the vehicle after
confirming that the indicator begins to
flash. Since unlocking the door from
inside the vehicle will activate the
30
system, never let anyone stay in the
vehicle with the system enabled.
Triggering the alarm
The system will raise an alarm in any of
●
the following situations:
Any door, boot, or bonnet is opened
●
without using the keyless access
function of the smart key.
Disarming the system
Anti-theft alarm can be stopped by:
●
Unlocking the door with a valid smart
●
key/NFC card.
Using the microswitch to unlock the
●
door by carrying a valid smart key.
Opening the boot remotely with a
●
valid smart key.
Starting the vehicle remotely with a
●
valid smart key.
Pressing the START/STOP button
●
inside the vehicle while carrying a
valid smart key.
WARNING
Do not modify the anti-theft
●
system by means of alteration or
addition. Otherwise, the system
may fail.
Anti-theft Indicator
With the vehicle power OFF and four
doors locked, the anti-theft indicator
stays on for about 10s after the anti-theft
mode is activated.
Advertisement
Table of Contents
