BYD SEAL 2023 Owner's Manual page 140

engaging brakes to the corresponding
wheels to help the driver control skidding
and maintain directional stability.
Traction control system (TCS)
TCS prevents the drive wheels from
skidding during acceleration by reducing
the motor power, and, when necessary,
applies braking forces to prevent drive
wheels from spinning. It makes it easy for
the vehicle to start, accelerate, and climb
under adverse driving conditions.
WARNING
TCS may not work effectively in
●
the following situations:
When driving on slippery roads,
●
even if TCS is working properly,
it may not be able to control
the direction and meet power
requirements.
Do not drive in conditions where
●
the vehicle may lose its stability
and power.
Hill hold control (HHC)
After the brake pedal is released, HHC
maintains brake pressure for one second
to prevent backward sliding.
Hydraulic break assist (HBA)
When you press the brake pedal quickly,
HBA detects that the vehicle is in
emergency condition. It quickly increases
the brake pressure to the maximum so
that ABS can intervene more quickly and
shorten the braking distance effectively.
Controller deceleration parking (CDP)*
for parking brake
When you hold the "P" button, the CDP
function starts working so that the vehicle
brakes at a constant deceleration (0.4 g if
Parking is engaged but the brake pedal
is not pressed, and 0.8 g if Parking is
engaged and the brake pedal is pressed)
until the vehicle stops. The function stops
working when the "P" button is released.
ESC operation instructions
Intelligent power braking system has the
following new functions compared with
the original ESC system:
Brake assist mode
●
It is used to adjust the brake pedal
●
feel. The relation curve between the
brake pedal depth and the vehicle
deceleration varies across different
modes for you to choose a preferred
pedal feel.
You can select Comfort or Sport in
●
infotainment touchscreen →
Vehicle Settings → Smart Chassis →
Brake assist mode.
Comfort parking (CST)
●
Comfort parking function: When the
●
vehicle decelerates to stop in a non-
emergency situation, the intelligent
power braking system reduces the
stop-instant suspension pitch and
impact by controlling the brake
pressure of the four brakes, providing
a smooth stop feeling for the driver.
Go to infotainment touchscreen →
●
→ Vehicle Settings → Smart
Chassis to enable or disable comfort
parking.
After the function is triggered, the
●
braking distance may increase by 2-5
cm. Increase the distance from the
vehicle or obstacle ahead accordingly
before stopping your vehicle.
Brake disc wiping
●
Brake disc wiping function: When the
●
wiper switch is on or the rain sensor
detects rain, the intelligent brake
control system applies a small brake
pressure to all four brakes so that
pads come into contact with discs
to remove the water film from the
04
→
139