BYD SEAL 2023 Owner's Manual page 165

REMINDER
This function allows charging two
●
phones at the same time.
Thick phone shells may prevent
●
charging.
You can use the Qi soft switching
●
via PAD to separately activate/
deactivate the wireless charging
on the left or right side.
On bumpy roads, the
●
wireless phone charging may
intermittently stop and then
resume.
Try to ensure that the surface on
●
which a mobile phone is placed is
parallel to the charging module.
If the phone moves from the
wireless charger area and stops
charging, move it back.
If the phone cannot be charged
●
properly, ensure that there are
no foreign objects in the wireless
charging area, or wait for the
wireless charging area to cool
down before trying again. If it
is still impossible to charge the
phone, contact a BYD authorised
dealer or service provider.
After power-off, if the phone is
●
still charging and the driver's door
is opened, the instrument cluster
sounds an alarm and the message
"Please take your cell phone with
you" is displayed for five seconds.
CAUTION
Ensure your smart key is more
●
than 10 in (25 cm) away from
the wireless charger area when
the wireless charger system is
working.
164
CAUTION
To avoid wireless charger
●
dysfunction or even accidents, do
not place coins, metal keys, metal
rings, or other articles containing
metal in the wireless charger area
together with the phone.
To avoid damage to the charger
●
area, do not place heavy objects
on it.
If the phone wireless charger
●
system is faulty and does not work
properly, it is recommended to
contact a BYD authorised dealer
or service provider.
BYD will not assume any
●
responsibility for any problems
caused by improper use. If
the product is disassembled or
modified, the free warranty will be
terminated.
For safety reasons, do not leave an
●
unattended phone being charged
in the vehicle.
For safety reasons, refrain from
●
checking phone charging status
while driving.
If a metal item is found between
●
the device and the charger rubber
pad during charging, do not
remove the metal item with bare
hands to prevent burning.
For better charging, the centre
●
of the phone coil must be
aligned with the centre of wireless
charger (indicated with text in the
charging area).
Prevent any fluid from coming
●
into contact with the charger
area. The wireless charger will
malfunction if water enters the
wireless charger via the gap
around the rubber mat.