BYD SEAL 2023 Owner's Manual page 88

Charging ends automatically when
●
early stop time is due or the charging
is complete.
Press the unlock button twice
●
within three seconds or press the
microswitch on the door handle to
stop charging.*
Disconnect the charge port:
●
Press the unlock button on the
●
smart key or press the door handle
microswitch while carrying the smart
key and pull out the charging
connector.
When the DC charging pile charging
●
is complete, organise the charging
equipment and store the charging
connector in its designated position
properly.
Reinsert the DC charge port cap and
●
close the port door.
REMINDER
Do not close the charge port door
●
when the port cap is fully open.
CAUTION
If the charging connector cannot
●
be removed after unlocking,
try a few more unlocking
attempts. If that does not work,
try emergency unlocking. For
the operating procedure, see
"Emergency Unlocking of the
Charge Port" in "Electric Lock
Control of the Charge Port".
To unlock the charge port after DC
●
charging, press the unlock button
twice within three seconds for the
operation to be successful.
See the charging instructions for
●
specific charging precautions.
WARNING
See section "Charging
●
Instructions" for charging safety
warnings.
Reservation Charging (Only AC)
The charging mode can be set on the
●
infotainment system. To access the
setting:
Tap infotainment touchscreen →
●
→ New Energy → Reservation
charging.
To enter the setting page, say "Hi
●
BYD, start reservation charging", "Hi
BYD, I want to make reservation
charging" or "Hi BYD, please help me
start reservation charging".
Exit the Reservation Charging screen
●
by tapping the Back
button or by voice assistant:
To exit the page, say "Hi BYD, end
●
reservation charging" or "Hi BYD, exit
reservation charging".
Setting screen
① Reservation charging switch
② Charging start and end time
③ Repeat cycle
④ Settings
The factory default setting is to
●
charge the vehicle immediately. That
is, reservation charging is disabled.
04
/Home
87