BYD SEAL 2023 Owner's Manual page 26

Anchor supports (for the top tether)
●
are provided at the rear outboard seat.
CAUTION
Secure the top tether when
●
installing the child restraint
system.
Installing Child Restraint Systems
Precautions for installation
① Do not turn the anchorage lever trim
cover outward.
② Push the anchorage lever trim cover
inward in use.
③ Press the upper part of anchorage lever
trim cover to reset after use.
Installing child restraint systems:
1. Open the anchorage lever trim cover
and install the child restraint system to
the seat.
REMINDER
The anchorage lever is located
●
on the bevel at the rear end
of the seat cushion. It can be
seen when the lower part of
the child restraint trim cover is
pressed. After the child restraint
is removed, the upper part of
its cover needs to be pressed to
return the cover.
WARNING
When using the lower anchoring
●
device, make sure that no foreign
objects are around the anchoring
device and that the seat belt
is not stuck behind the child
restraint; make sure that the
01
25