Table of Contents
Advertisement
Soft Starter Startup Manual Sprecher + Schuh Hydraulic Installation
3. Verify the LCD on the Smartrise board and the soft starter power up.
Final Setup
Perform the following to set the Bypass Term Limit. Complete the checklist during the
verification process.
NOTE: The selected menu within the menu options is shown with a *.
1. Toggle the Inspection/Normal switch to INSP position.
2. On the Smartrise Machine Room board, press the left arrow (ESC) button several times
to get to the MAIN SCREEN.
3. Press the right button to access the Main Menu.
4. From the MAIN MENU, scroll and select Setup.
5. From the SETUP menu, scroll and select Misc.
Page 6
Figure 7: Breakers
Figure 8: MAIN MENU – Setup
Figure 9: SETUP Menu – Misc
© 2020 Smartrise Engineering, Inc. All Rights Reserved
October 26, 2020
Advertisement
Table of Contents
Troubleshooting
