Kodak OG-Plus3.24RM Installation & User Manual page 63

Back to grid
voltage
Back to discharge
voltage
Charger source
priority:
Max. charging
current
Max. AC charging
current:
Float charging
voltage
Bulk charging
voltage
Battery
equalization
Real-time
Activate Battery
Equalization
Equalized Time
Out
Equalized Time
Equalization
Period
Equalization
Voltage
Enable/Disable LCD Auto-return
Functions to Main screen
Fault Code
Record
Backlight
Bypass Function
Beeps while
primary source
interrupt
Over
Temperature
Auto Restart
Overload Auto
Restart
Buzzer
RGB LED Setting Enable/disable
on connected battery type.
When "SBU" or "SOL" is set as output source priority and battery
voltage is lower than this setting voltage, unit will transfer to line mode
and the grid will provide power to load.
When "SBU" or "SOL" is set as output source priority and battery
voltage is higher than this setting voltage, battery will be allowed to
discharge.
To configure charger source priority.
It's to set up battery charging parameters. The selectable values in
different inverter model may vary.
Please see product manual for the details.
It's to set up battery charging parameters. The selectable values in
different inverter model may vary. Please see product manual for the
details.
Enable or disable battery equalization function.
It's real-time action to activate battery equalization.
To set up the duration time for battery equalization.
To set up the extended time to continue battery equalization.
To set up the frequency for battery equalization.
To set up the battery equalization voltage.
If enable, LCD screen will return to its main screen after one minute
automatically.
If enabled, fault code will be recorded in the inverter when any fault
happens.
If disabled, LCD backlight will be off when panel button is not operated
for 1 minute.
If enabled, unit will transfer to line mode when overload happened in
battery mode.
If enabled, buzzer will alarm when primary source is abnormal.
If disabled, the unit won't be restarted after over-temperature fault is
solved.
If disabled, the unit won't be restarted after overload occurs.
If disabled, buzzer won't be on when alarm/fault occurred.
Turn on or off RGB LEDs
61