Communication Connection - Kodak OG-Plus3.24RM Installation & User Manual

Solar Charging Mode
INVERTER MODEL
Max. PV Array Open Circuit Voltage
PV Array MPPT Voltage Range
Please follow below steps to implement PV module connection:
1. Assemble the ring terminal based on the recommended cable and terminal
size.
2. Check correct polarity of connection cable from PV modules and PV input
connectors. Then, connect positive pole (+) of connection cable to positive
pole (+) of PV input connector. Connect negative pole (-) of connection
cable to negative pole (-) of PV input connector.
3. Make sure the wires are securely connected.

Communication Connection

Serial Connection
Please use supplied communication cable to connect to inverter and PC. Insert bundled CD into a computer and
follow on-screen instruction to install the monitoring software. For the detailed software operation, please
check user manual of software inside of CD.
Wi-Fi Connection
This unit is equipped with a Wi-Fi transmitter. Wi-Fi transmitter can enable wireless communication between
off-grid inverters and monitoring platform. Users can access and control the monitored inverter with
downloaded APP. You may find "WatchPower" app from the Apple
Play Store. All data loggers and parameters are saved in iCloud. For quick installation and operation, please
check Appendix III.
OG-Plus 3.24RM OG-Plus 3.48RM OG-Plus 5.48RM
30~115Vdc
®
8
145Vdc
60~115Vdc
Store or "WatchPower Wi-Fi" in Google ®