Operation With The Ir Remote Control Ir-46 - EuroLite GoFlow100 User Manual

Operation with the IR remote control IR-46

With the extended setting options of the remote control, the integrated show programs in automatic or
sound-controlled mode as well as color / gobo selection with rotation can be selected. Additionally, two
individual settings can be saved.
The IR remote control will only work in stand-alone mode, it will not work in DMX or slave mode Press the
buttons repeatedly to switch between the programs. The display indicates the current setting. When
actuating a button, always hold the remote control in the direction of the sensor on the front or rear of the
device. A direct line of sight between the remote control and the sensor is required. The remote control can
be activated/deactivated in the system settings (I-EN).
Battery
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control
is not possible.
If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the right
and at the same time remove the battery support. For operation, one 3 V button cell
type CR 2025 is required. When inserting, pay attention that the positive pole of the
button cell shows upwards in the support
Button
On/off
Automatic mode – auto programs
Sound-controlled mode – sound controlled programs
Reduce speed of auto programs, gobo wheel rotation, gobo rotation,
mirror rotation and rainbow effect
Increase speed of auto programs, gobo wheel rotation, gobo rotation,
mirror rotation and rainbow effect
Change rotation direction
Gobo rotation
Mirror rotation
Color choice: CW01 – CW18
Program save buttons: press for 3 seconds to save the current setting;
,
press briefly to recall the setting
Rainbow effect: CW19 – CW20
Gobo selection
-
Gobo wheel rotation
35/44
Function
At-01 – At-24
Sd-01 – Sd-24
00149274, Version 1.0