Replacing Gobos - EuroLite GoFlow100 User Manual

REPLACING GOBOS

Slot-in gobo-system for exchanging gobos without tools!
DANGER! Electric shock caused by high voltages
Within the device there are areas where high voltages may be present. Always disconnect the
device from the mains socket prior to installing or replacing a gobo.
CAUTION! Risk of material damage in case of inappropriate handling of the gobo wheel
Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be opened.
If you wish to use an alternate gobo, please follow the instructions below:
1 Remove the Gobo/Color Wheel compartment cover via the two knurled screws.
2 Remove the fixation ring (e.g. with a screw driver). Remove the gobo and insert the new motif. A pair of
tweezers may be helpful for this. Press the fixation-ring together and insert it in front of the gobo.
3 Replace the compartment cover before putting the device back into operation.
29/44 00149274, Version 1.0