Operation With The Ir Remote Control Ir-46 - EuroLite AKKU MBT-3 User Manual

Operation with the IR remote control IR-46

With the extended setting options of the remote control, the integrated show programs in automatic or
sound-controlled mode as well as preset color selection can not only be selected but individual settings
can also be saved. The IR remote control will only work in stand-alone mode, it will not work in DMX or
slave mode Press the buttons repeatedly to switch between the programs. The display indicates the current
setting. When actuating a button, always hold the remote control in the direction of the sensor at the control
unit's front or rear. A direct line of sight between the remote control and the sensor is required. The remote
control can be activated/deactivated in the system settings (I-EN).
Battery
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control
is not possible.
If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the right
and at the same time remove the battery support. For operation, one 3 V button cell
type CR 2025 is required. When inserting, pay attention that the positive pole of the
button cell shows upwards in the support
* Saving desired settings:
To save a desired setting, press and hold one of the three buttons for 3 seconds while the program you wish
to save is running. In this way, you can save 3 individual programs and recall them at any time with only one
touch.
Button
On/off
Automatic mode – auto programs
Sound-controlled mode – sound controlled programs
Increase speed of auto programs
--
Color presets (LC1-15) for the left LED
Color presets (MC1-15) for the middle LED
Color presets (RC1-15) for the right LED
Color presets (AC1-15) for all three LEDs
Program save buttons *
35/44
Function
Au-01 – Au-09
SD-01 – SD-09
00149656, Version 1.0