EuroLite GoFlow100 User Manual page 34

Manual mode
The mode MnL allows the individual adjustment of each effect. Press the MENU button to return to the main
menu.
1 Press the button MENU so many times until MnL is indicated in the display. Confirm with the ENTER
button.
2 In the mode L.xxx, the total brightness can be set. Use the UP and DOWN buttons to adjust the desired
brightness from L.000 (0%) to L.255 (100%) and confirm with ENTER.
3 The display then indicates the menu item for Strobe S.xxx. Use the buttons UP and DOWN to adjust the
desired flash frequency from S.000 (slow) to S.255 (fast) and confirm with ENTER.
4 You now have the option to set the parameters for Color Wheel (C-W.xx), Gobo Wheel (G-W.xx),
Gobo Rotation (G-r.xx) and Mirror Rotation (M-r.xx) with the UP and DOWN buttons. Select the
desired parameter option and confirm with ENTER.
5 Should the menu for the Color Wheel (C-W.xx) be called up, use UP and DOWN to set the desired
program (CW01 - CW18) and confirm with ENTER. You can select the direction of rotation via the CW19
and CW20 settings, confirm with ENTER. The menu for the sequence speed S.xxx is then called up.
Use the UP and DOWN buttons to set the desired speed from S.001 (slow) to S.100 (fast). Confirm with
ENTER to enter the next submenu.
6 The following submenu item is for the Gobo Wheel (G-W.xx). Use UP and DOWN to set the desired
program (GW01 - GW08) and confirm with ENTER. With the settings GW09 and GW10 you can select
the rotation direction, then confirm with ENTER. The menu for the sequence speed S.xxx is then called
up. Use the UP and DOWN buttons to set the desired speed from S.001 (slow) to S.100 (fast). Confirm
with ENTER to enter the next submenu.
7 Subsequently, the submenu item for the Gobo Rotation (G-r.xx) is called up. Use UP and DOWN to set
the desired rotation direction of the gobo (Gr01 - Gr03) and confirm with ENTER. The menu for the
sequence speed S.xxx appears next. Use the UP and DOWN buttons to set the desired speed from
S.001 (slow) to S.100 (fast). Confirm with ENTER to enter the next submenu.
8 Lastly, the submenu item for the Mirror Rotation (M-r.xx) is called up. Use UP and DOWN to set the
desired mirror rotation direction (Mr01 - Mr03) and confirm with ENTER. Again, the menu for the
sequence speed S.xxx is called up. Use the UP and DOWN buttons to set the desired speed from S.001
(slow) to S.100 (fast) and confirm with ENTER.
9 Press MENU to return to the main menu.
34/44 00149274, Version 1.0