Table of Contents
Advertisement
Available languages
Available languages
CONNECTION TO THE MAINS
The device uses an auto-range power supply that accepts input voltages between 100 and 240 volts.
1
Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2
To switch off the unit, disconnect the power plug.
3
Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
4
The jack POWER OUT allows for power supply of further devices. To interconnect several devices,
connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.
Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the IR remote control or in DMX-controlled mode via any commercial DMX
controller. With a suitable radio receiver, the DMX control signal can also be transmitted wirelessly to the
unit. The operating modes can be selected manually by means of the display and the control buttons.
Operating buttons
Button
MENU
ENTER
UP
DOWN
Menu structure
Default settings shaded
Mode
Automatic mode
Sound control
Function
Selects the operating mode or returns to the initial screen.
Activates a value to be modified, enters a submenu or saves a value when
modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Display
At01-At24
AUT
S.001-S.100
Sd01-Sd24
Snd
S.001-S.100
Showprogram 1-24
Running speed slow > fast
Showprogram 1-24
Microphone sensitivity 0-100%
31/44
Function
00149274, Version 1.0
Advertisement
Table of Contents
