Operation With The Foot Switch; Operation With The Ir Remote Control - EuroLite LED KLS-170 User Manuals

Operation with the foot switch

The wireless foot switch allows convenient control of the light set over a distance of up to 30 meters (line-of-sight).
Note
• Control via foot switch is not possible in DMX or slave mode.
Activating the foot switch
The light set must be configured for use with the foot switch.
1 Press the button MENU so many times until SYS is indicated in the display. Confirm with the ENTER button.
2 Call menu item W-En with the ▲ and ▼ buttons. Confirm with ENTER.
3 Use ▲ and ▼ to select the setting ON. Thus, the built-in antenna is activated.
4 Confirm with ENTER. Now the light set can be remote-controlled with the foot switch.
5 For operation, put the antennas at the light set and the foot switch in a vertical position.
6 Switch on the foot switch with the rear on/off switch. After use, switch off the foot switch in order to save the
battery.
Functions
The foot switch provides quick access to the integrated show programs in automatic mode or sound-controlled
mode.
1 Press pedal AUTO repeatedly to switch between the show programs ( p. 25) in automatic mode. They will be
indicated in the display.
2 Press pedal MUSIC repeatedly to switch between the show programs in sound-controlled mode. They will be
indicated in the display.
3 Press pedal COLOR to select the color of the LEDs: R G RG B RB GB RGB.
4 Press pedal BLACKOUT to switch off the LEDs. Press the pedal again to turn the LEDs back on.

Operation with the IR remote control

The IR remote control allows convenient control of the integrated show programs in automatic mode or sound-
controlled mode. Press the buttons repeatedly to switch between the programs. The display indicates the current
setting. When actuating a button, always hold the remote control in the direction of the sensor at the control unit's
front or rear. There must be visual connection between the remote control and the sensor. The remote control can
be activated/deactivated in the system settings
Note
• Control via IR remote control not possible in DMX or slave mode.
Button
/
–
—
On/off
Show program AM01—AM03 in automatic mode
Show program SM01—SM03 in sound-controlled mode
Show program AP01—AP17 or SP01—SP12 for the LED spots
Show program AF01—AF10 or SF01—SF10 for the strobe LEDs
Switching between automatic mode/sound-controlled mode
Pause
Color selection (CoLo mode): R G RG B RB GB RGB
Running speed of the show programs
Function
27 • EN