Eurolite Ir-38 Remote Control - EuroLite Multiflood IP 8x10W RGBW Wash CRMX User Manual

EUROLITE IR-38 remote control

The IR remote control has the following functions:
_
+
FAV FAV
1 2
FADE
STROBE
JUMP
WHITE
*
Preset color
R<255>,G<121>,B <000>,W <000>
Preset color
R<110>,G<000>,B <191>,W <000>
Preset color
R<000>,G<255>,B <255>,W <000>
Preset color
R<255>,G<000>,B <255>,W <000>
Preset color
R<255>,G<255>,B <000>,W <000>
Notes:
• When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
• The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil
from the battery support on the rear side of the remote control. Otherwise operation of the remote control is not
possible.
• If the range of the remote control decreases, replace the battery. For this purpose,
the rear side of the remote control press the small bar with the groove to the right
at the same time remove the battery support. For operation, one 3 V button cell
CR 2032 is required. When inserting, pay attention that the positive pole of the
button cell shows upwards in the support.
• Remove the battery from the remote control as a precaution if the device is not used for a longer period of time.
Buttons
OFF ON
OFF
Pty1
Pty2
+
Pty3
FAV
Pty4
3
CC
COLOR
FLASH
FAV
1
Function
IR remote control
ON
on/off
_
Dimmer intensity of the LED colors /
stepless RGBW color mixture, brightness with
+ and -
Preset colors*,
brightness with + and -
F
avorite color setting - press one of the 3 buttons
FAV FAV
for 3 seconds to save your own color mix.
2 3
Internal program Pty 1,
Pty1
Switching colors, speed with + and -
Internal program Pty 2,
Pty2
Switching colors, speed with + and -
Internal program Pty 3,
Pty3
Switching colors, speed with + and -
Internal program Pty 4,
Pty4
Switching colors, speed with + and -
Switching through preset colors 01-15,
CC
brightness with + and -.
Fade/Jump
FADE
JUMP
Switching internal programs
Pty1-Pty4
Strobe effect only for white,
STROBE
WHITE
speed with + and -
A second press ends the strobe effect.
Strobe effect 12 colors,
speed with + and -
COLOR
FLASH
A second press ends the strobe effect.
30/36
on
and
type
00151618, Version 1.0