Power Source; Connecting The Power Supply - Teldat 5Ge-Rail Installation Manual

Teldat S.A.
Outline drawing
Fig. 4:

3.3 Power Source

Note
Before connecting the router, please carefully read the instructions provided below!

3.3.1 Connecting the power supply

To power the Teldat 5Ge-Rail, it supports a 24 V to 110 V nominal DC power source.
Note
It is important to ensure that the power input of the device is compatible with your power source.
If the temperature of the device is below 5 °C, a heater will activate and the device will not boot until the
temperature has increased. While in this state, power consumption amounts to 55 W.
The power connector is conveniently located as shown in the image below.
Fig. 5: Power supply connector
Please note that there is no on/off switch or fuse for the device. The power supply information can be found on a la-
bel located on the rear of the device.
Teldat 5Ge-Rail
3 Components and Power Supply
9