McLaren Super Series Owner's Handbook Manual page 92

Hide thumbs Also See for Super Series:
Table of Contents

Advertisement

Driving Controls
Seamless Shift Gearbox
When the vehicle speed is below 6 mph (10 km/h)
or the vehicle is stationary with a gear selected,
select a downshift and hold the paddle to select
neutral.
Neutral can be selected at any vehicle speed by
pressing the N button. Pressing the D button or
initiating a shift by operating the gearshift
paddles will then select the appropriate gear for
the vehicle speed.
Pre-Cog
The gearbox will anticipate the next gear change
and pre-select the required gear to ensure fast
and seamless gear change.
When the vehicle is under acceleration, the
gearbox will automatically pre-select the next
highest gear. If a downshift is required
immediately following hard acceleration, lightly
pull and hold the downshift paddle to the Pre-
Cog position to pre-select the next lowest gear.
When ready, fully pull the paddle for an almost
instantaneous downshift.
To pre-select an upshift during deceleration,
lightly pull and hold the upshift paddle to the
Pre-Cog position to pre-select the next highest
gear. When ready, fully pull the paddle for an
almost instantaneous upshift instead of the
automatically pre-selected downshift.
2.20

Advertisement

Table of Contents
loading

Table of Contents