McLaren Super Series Owner's Handbook Manual page 155

Central Display
Introduction
1. Home, on/standby
2. Volume
3. Climate control
4. Media
5. Mute
6. Phone
7. Radio
8. Navigation
Home, on/standby
To switch the MIS on, press the home
button (1).
When the MIS is on, a brief press of the button
will return you to the home screen from
anywhere in the system.
Press and hold the home button for three
seconds to switch the MIS into standby mode.
To switch from standby mode to on, simply press
the home button.
To use the MIS when the vehicle s Ignition is off,
press and hold the home button for one second
to access Timer mode. In this mode the MIS will
shut down after 15 minutes if not extended by
the user.
Volume
Rotate the control (2) clockwise to increase
volume or anti-clockwise to reduce the volume.
A horizontal bar representing the volume setting
will appear briefly on the screen.
Use the volume control to set the volume of the
source that is currently active. The name of the
active source will appear on the screen.
If the Mute button (5) has been used (See Mute,
page 4.05), rotating the volume control in either
direction will restore the sound.
NOTE: You can adjust any volume
source by rotating the volume control
dial. For temporary sources of audio
(phone calls), this can be adjusted using
the dial when the source is active.
Climate control
Press the Climate Control button (3) to
access the Climate Control system directly.
See Climate Control, page 5.04.
Media
Press the Media button (4) to access any
stored or connected media. See Media,
page 4.32.
Mute
Press button (5) to mute all sound from the
system. The mute symbol
displayed on the screen.
Press again to restore the sound. The sound can
also be restored by rotating the volume control
(2) in either direction.
Phone
Press button (6) to access the Phone
function. See Phone, page 4.25.
will be briefly
4.05