McLaren Super Series Owner's Handbook Manual page 42

Before You Drive
Seats
Press the button (2) where the required setting
is stored, and hold until the seat, exterior mirrors
and steering wheel have completed their
adjustment.
Comfort exit
WARNING: Ensure that no one can
become trapped as the seat moves.
When comfort entry/exit is active, the driver s
seat will move fully rearwards and to its lowest
position and the steering wheel will move
inwards and to its highest position when the
engine is off and the driver s door is opened.
1.32
This assists exit from the vehicle. To switch the
feature on or off, see Comfort entry/exit, page
4.18.
NOTE: The steering wheel will only
change position if an electric steering
column is fitted.
Comfort entry
After entering the vehicle, you can return the
driver s seat and steering wheel to their most
recent position using the control stalk on the left
of the steering column.
NOTE: The steering wheel will only
change position if an electric steering
column is fitted.
The function will only be available when 'Comfort
Entry available Pull left stalk to activate Press
OK to cancel' is displayed on the Folding Driver
Display.
The vehicle must be Awake with ignition off, the
driver s door closed, and comfort entry/exit ON.
1. Pull the control stalk towards you once to
initiate the comfort entry function.
2. If at any point you wish to cancel the
function, operate the control stalk or open
the driver s door. A message 'Comfort Entry
returning Operate stalk or open door to
abort' will appear on the Folding Driver
Display.
NOTE: This function will only return the
seat and steering wheel to the position
they were in prior to the comfort entry/
exit function being used. It will not use
any of the memory positions, unless the
previous position was one of the stored
memory positions.
3. If the seat or steering wheel are manually
adjusted before the stalk is used, the
function will be lost and will not be available
until the next time comfort entry/exit
function is used.
NOTE: Cancel the comfort entry/exit
function by starting the engine,
pressing a seat or steering column
switch, or by operating the control stalk
on the left of the steering column while
the seat is returning to position.