Storage Box; Safety Helmet Hook - Sym XA05W4-EU Series Owner's Manual

 Engine start control switch
The switch button position is under seat.
"ON" position: Engine is locked and can not be started
engine in this position.
"OFF" position: When the ignition switch is "on" position,
the start control switch is "off" position, press
electrical starter button while holding the front
or rear brake lever will start the engine.
 Horn Switch
Press this button down when ignition switch is in the "ON" position, the horn will sound.
 Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the "ON" position, and slide the turn signal switch to left or right . Then, the
turn signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left-side turn signal light flashing means you intend to make a left turn.
Right-side turn signal light flashing means you intend to make a right turn.
§STORAGE BOX§
 This box is located under the saddle.
 Maximum load capacity:10kg.
 Do not store valuables in the box.
 Make sure that the saddle has been locked
completely after it was pressed down.
 Take out valuables before washing to avoid wetting
these objects.
 Do not place thermal sensitive objects in the box
because of engine's heat and high temperature.
§SAFETY HELMET HOOK§
 Stop the motorcycle, and hook the safety helmet
chin belt the hook.
CAUTION:
 Do not hang the safety helmet onto this hook
when riding to avoid damaging motorcycle and
loosing safety helmet's function.
Engine start
control switch
9

Storage box

Hook