Operation Of Ignition Switch; Operation Of Steering Handle Lock Switch; Operation Of Seat Open Switch - Sym XA05W4-EU Series Owner's Manual

 ABS indicator light:(ABS Model)
Normally the ABS indicator light goes on when the ignition switch is turned on and goes off
shortly after the scooter starts moving.
The ABS (Anti-lock Brake System) indicator light goes on when the ignition switch is turned on and
goes off shortly after the scooter starts moving. If the ABS is normal, it stays off. If something is
I
wrong with the ABS, the indicator goes on and stays on. When the indicator light is on, the ABS does
G
not function but if the ABS fails, the conventional brake system will still work normally.
N
1."S" button:
I
Press"S" button about one or two seconds to switch to voltage display. Return to time display
automatic about one minute later, or press"S" button short time to return to time display
T
immediately.
I
O
2."M" button:
a. Press"M" button for long time to enter hour adjustment, then hour display will flash. Press"S"
N
button to adjust hour, and press"M" button shortly to switch to minute adjustment. At this time
minute display will flash. Press"S" button shortly to increase a minute, press"S" button long time
S
minute figure will automatically be increased continuously.
W
b. After adjust time well, press"M" button for long time to exit setting state, or wait for about 1 ~ 2
I minutes to exit setting state automatically.
I
T §OPERATION OF IGNITION SWITCH §
G
C
N
"ON" position:
H
I
 Engine can be started in this position.
T
 Ignition switch key can not be removed.
I
"OFF" position:
O
 Engine is shut off and can not be started in this
N
position .
 Ignition switch key can be removed.
§OPERATION OF STEERING HANDLE LOCK SWITCH §
S
W
"Steering handle lock" position
I
 Turn the steering handle to left and insert the key
T
into, press ignition switch key clockwise and then
C
lightly turn it to left to the "lock" position.
 The steering handle is locked in this position.
H
 Ignition switch key can be removed.
 When unlocking, simply turn the key from the
"LOCK" position to the "OFF" position.
§OPERATION OF SEAT OPEN SWITCH§
 Inserted the ignition switch key in the main switch lock.
 Turn the ignition switch key to the"seat open" position counter-clockwise.
 Then, the seat will be open.
CAUTION:

Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to "OFF" and "LOCK" position will shut off the electrical system and that may result in
a dangerous accident. Therefore, the ignition switch can only be turned off after the
motorcycle has been completely stopped.
 Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
 If ignition switch remains in the "ON" position for a prolonged period after the engine has
been stopped, the battery's capacity will be reduced and this may affect the engine's start
ability.

Make sure to take the key away with you before you lock your seat.
7
IGNITION SWITCH
CAUTION:

Make sure to take the
key away with you
before you lock your
seat.