Storage Box; Safety Helmet Hook - Sym XC05W2-EU Series Owner's Manual

 Engine start control switch
The switch button position is under seat.
"ON" position: Engine is locked and can not be started
engine in this position.
"OFF" position: When the ignition switch is "on" position,,
press electrical starter button while holding the
front or rear brake lever will start the engine.
 Horn Switch
Press this button down when ignition switch is in the "ON" position, the horn will sound.
 Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the "ON" position, and slide the turn signal switch to left or right . Then, the
turn signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left-side turn signal light flashing means you intend to make a left turn.
Right-side turn signal light flashing means you intend to make a right turn.
§STORAGE BOX§
 This box is located under the saddle.
 Maximum load capacity:10kg.
 Do not store valuables in the box.
 Make sure that the saddle has been locked completely
after it was pressed down.
 Take out valuables before washing to avoid wetting these
objects.
 Do not place thermal sensitive objects in the box
because of engine's heat and high temperature.
§SAFETY HELMET HOOK§
 Stop the scooter, and hook the safety helmet
chin belt the hook.
CAUTION:
 Do not hang the safety helmet onto this hook
when riding to avoid damaging motorcycle and
loosing safety helmet's function.

10
Engine start
control switch

Storage box

Hook