Call; End Call; Page Settings; Browser Configuration - Fanvil i18S User Manual

`

2. Call

Configure shortcut key as hot key then setup a number. The configured number will be
called when user press the shortcut key.

3. End Call

Enable the DSS key to hang up the call.
D.Page settings

1. Browser configuration

When the device and your computer are successfully connected to the network, enter
the IP address of the device on the browser as http://xxx.xxx.xxx.xxx/, Then you can see the
login interface of the web page management.
Input the user name and password. Then click the [logon] button to enter the settings
screen.
After configuring the equipment, remember to click SAVE under the Maintenance tab. If
this is not done, the equipment will lose the modifications when it has been rebooted.

2. Password Configuration

There are two levels of access: root level and general level. A user with root level
access can browse and set all configuration parameters. While a user with general level can
set all configuration parameters except server parameters for SIP
Default user with general level:
Username: guest
Password: guest
9
9 / 43