Port Leds In Stk Mode; Management Port Leds - Extreme Networks ExtremeSwitching 5420 Series Installation Manual

Port LEDs in STK Mode

Port LEDs in STK Mode
The port LEDs enter the STK display mode after the Mode button is pressed twice,
indicated by the STK LED. STK mode is used to indicate slot presence and slot number
via the first eight port LED, as referenced by the following table:
Table 22: Port LEDs in STK Mode
Color/State
Steady green
Blinking green This slot has a slot number corresponding to the port number of the

Management Port LEDs

The management port uses two LEDs to indicate port activity and link status, as
referenced by the following table:
Table 23: Management Port LEDs
Right side LED
Link
Left side LED
Act
94 ExtremeSwitching 5420 Series Hardware Installation Guide
Speed
The slot corresponding to the port number of the LED is present.
blinking LED.
Solid Green
Off
Blinking Green
Off
State
Link up
No link up or port disabled
State
Packet transmitting or receiving
No packet transmitting or receiving
Monitoring the Device