Extreme Networks ExtremeSwitching 5420 Series Installation Manual page 29

ExtremeSwitching 5420 Series Overview
•
2 Stacking/SFP-DD ports
•
1 Serial console port (RJ-45)
•
1 10/100/1000BASE-T out-of-band management port
•
2 USB Type-A ports for management or external flash
•
1 USB Micro-B console port
Figure 23: 5420M-16MW-32P-4YE Front Panel
1 = 100Mb/1Gb/2.5Gb
ports10/100/1000BASE-T ports
2 = 10/100/1000BASE-T ports
3 = Mode button
The rear panel of the switch includes:
•
1 fan module
•
Grounding lug
•
2 power supply slots
Figure 24: 5420M-16MW-32P-4YE Rear Panel
1 = Grounding lug
2 = Fan module
Note
These ports can operate either as stacking ports, or as 10G Ethernet ports
with SFP+ optics using the disable stacking-support command.
ExtremeSwitching 5420 Series Hardware Installation Guide
5420M-16MW-32P-4YE Switch Features
4 = USB Micro-B console port
5 = 10/100/1000BASE-T out-of-
band management port
6 = RJ-45 serial console port
3 = Power supply slots
7 = USB Type-A
ports
8 = SFP-DD
stacking ports
9 = 1/10/25G SFP28
ports
29