30
Inspection and Cleaning
To clean the device, wipe down the casing with a damp cloth using warm water
and a cleaner. Follow with a clean damp cloth to remove excess cleaner. Finish
with a dry cloth to remove excess moisture. You can also use wipes that have a
70% v/v solution of isopropyl alcohol.
Rub the device vigorously with the cloth or wipe to ensure thorough cleaning
of the entire surface.
Do not use phenol, chlorine or any other type of solvent
that may cause the device deterioration resulting in load
bearing component failure.
Do not splash, drench or immerse the unit in water as the
unit could malfunction causing injuries to occur.
To ensure a better rolling surface for the trolley wheels, clean the inside of the
track every 4 months. To do this, insert a damp cloth in the opening and slide it
from one end of the track to the other.
Track Bridge /Track Bridge Bariatric Owner's Manual Part No. 001300-EN, 10-m10-2023
WARNING
WARNING