Shipment and on-site transport
4.4 Storing the regulator
NOTICE
!
Risk of regulator damage due to improper
storage.
Î Observe the storage instructions.
Î Avoid long storage times.
Î Contact SAMSON in case of different
storage conditions or longer storage
times.
Storage instructions
Î Protect the regulator against external
influences (e.g. impact).
Î Secure the regulator in the stored posi-
tion against slipping or tipping over.
Î Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
Î Protect the regulator against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
Î Make sure that the ambient air is free of
acids or other corrosive media.
Î The permissible storage temperature of
standard regulators is –20 to +65 °C.
Î Do not place any objects on the regula-
tor.
4-2
Note
We recommend to regularly check the regu-
lator and the prevailing storage conditions
during long storage periods.
Special storage instructions for elastomers
Elastomer, e.g. O-rings
Î We recommend a storage temperature of
15 °C for elastomers.
Î Store elastomers away from lubricants,
chemicals, solutions and fuels.
Tip
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
EB 2173 EN