System Settings Menu Overview; Adjusting System Settings - Stryker Neptune 2 ROVER ULTRA Service And Installation Manual

System Settings Menu Overview

The system settings menu allows the operator (the O.R. staff) to adjust the settings and
indicators for the Neptune 2. The options in this menu only adjust operational settings
such as fluid and suction units of measure, display brightness, and display contrast.
While the operator will make most of these adjustments, the technician can certainly
adjust these values if requested. The system settings menu also serves as a platform
for which to enter the technician menu, which is discussed in the next section.

Adjusting System Settings

1. Verify the power cord is connected and the power switch is in the ON position.
2. Depress and hold the bottom right soft key next to the control panel display until
the screen displays system setup.
Print Date: Dec 16, 2014 04:03:57 PM
0000026959, Rev. C Effective Date: Dec 16, 2014 3:43:21 PM
4-13