Configuring The Ip Address Manually (E.g. Wdap-C3000Ax) - Planet WDAP-C3000AX User Manual

Configuring the IP Address Manually
3.3.1
Summary:
Set up the TCP/IP Protocol for your PC.

 Configure the network parameters. The IP address is 192.168.1.xxx (If the default IP
address of the WDAP-C3000AX is 192.168.1.253, and the DSL router is 192.168.1.254,
the "xxx" can be configured to any number from 1 to 252.) and subnet mask is
255.255.255.0.
Select Use the following IP address, and then configure the IP address of the PC.
1
For example, the default IP address of the WDAP-C3000AX is 192.168.1.253 and the
2
DSL router is 192.168.1.254, or you may choose from 192.168.1.1 to 192.168.1.252.
User Manual of WDAP-C3000AX &WDAP-3000AX
Figure 3-6 TCP/IP Setting
- 28 -
(e.g. WDAP-C3000AX)